Gypsum Based Tile Adhesive, Levelling Compound and Screed

Our Gypsum based levelling compounds eliminate the need for un-coupling membranes therefore reducing the installation time and overall cost.

 

GBLC PRIMER

Primer compatable with Gypsum Based Levelling Compound & Gypsum Based Tile Adhesive.

A specially formulated primer for use as a surface preparation to increase bonding on Anhydrite/Calcium Sulphate and OPC based floors.

 

GBLC-PRIMER is especially effective in preparing the floors to accept GBLC & GBTA.
Improves floor/topping interface bonding.

PRODUCT ADVANTAGES

• Easy and quick to apply
• Compatible with Anhydrite/Calcium Sulphate based screeds
• Non-flammable
• Low odour
• Fast drying
• High bond strength
• Solvent free
• Can be applied early (up to 85%RH)

Coverage rate- 4-7 m2 per Ltr dependant on surface porosity.

Visit our  Catalogue/On Line Shop

 GBLC PRIMER

 

GBLC GYPSUM BASED LEVELLING COMPOUNDGBLC Levelling compound and Dapple bar

A high quality, self smoothing compound used for levelling uneven floors in preparation to recieve most types of floor covering including vinyl, carpets, tiles and linoleum. Recommended min thickness 3mm

Our Gypsum based levelling compound is compatable with Lafarge Gyvlon: Cemex Superflow: Bardon's Highflow and all other types of Calcium sulphate screeds.

Coverage rate- 1.25kg per m2 at 1mm

Visit our  Catalogue/On Line Shop

 LEVELLING COMPOUND

 

 GBTA GYPSUM BASED TILE ADHESIVE GBTA Tile Adhesive

Specifically formulated for use on Calcium sulphate screeds and is ideal for interior use. On this type of screed it is particularly effective at higher floor relative humidity (up to 85%) where opc based adhesives may delaminate. Gypsum based tile adhesive is NOT recommended in areas subject to continuous wetting such as showers, wet rooms and swimming pools.

Our Gypsum based tile adhesive is compatable with Lafarge Gyvlon Calcium Sulphate Screed.

Coverage rate- 1.33kg per m2 at 1mm

Visit our  Catalogue/On Line Shop 

GBTA GYPSUM BASED TILE ADHESIVE

For good tiling tips please watch the video below

GB FLO GYPSUM BASED SCREED -BAGGED GYPSUM BASED FLOOR SCREED GBFLO Screed

GB FLO bagged screed, when added to the requisite amount of water produces a flowing screed that requires minimal dappling for a smooth and level surface to SR2 of BS 8204:2 2003.

GB FLO is designed using a quality Gyvlon anhydrite binder combined with specially selected 0-4 mm aggregates. The screed can be used to prepare a wide variety of sub floors to receive tile, carpet, resilient flooring, wood flooring and many types of surface finishes.

Coverage rate- 2kg per m2 at 1mm

Visit our  Catalogue/On Line Shop

GB FLO GYPSUM BASED SCREED

 

Interested in becoming a stockist for the above products? Please contact us on 01772 335435 to discuss further.


Our Manufacturing Facility is certified to BS EN ISO 9001:2008